Industry News
2026 July 5th Week Marginal News Recommendation - Arnold Magnetic Technologies Corp. Boosts Efficiency, Power Density in Motors and Generators
Arnold Magnetic Technologies Corp. introduced the next generation of high-efficiency electric machines with its Arnon non-grain oriented electrical steel (NGOES). Engineered for ultra-thin lamination and precision finish, Arnon helps manufacturers design smaller, lighter and more energy-efficient motors, generators and transformers, reducing core losses and improving performance at high speeds and frequencies. With available thicknesses of 0.004 in., 0.005 in., and 0.007 in. (0.102 mm, 0.127 mm and 0.178 mm), Arnon represents a significant reduction from typical NGOES materials ranging from 0.30 to 0.47 mm. The company said thinner laminations reduce eddy current losses, minimizing heat buildup and enabling higher efficiency — especially in high-speed and high-frequency applications above 400 Hz and switching frequencies over 1 kHz. Arnon’s low coercivity is 8-15 percent lower than alternative NGOES products, cutting hysteresis losses and improving total core efficiency. Motors built with Arnon have achieved efficiencies exceeding 98 percent, demonstrating measurable performance gains in demanding applications. Arnon NGOES proves particularly advantageous in higher frequency motors and generators above 400 HZ. The thinner material offsets effects created by increased eddy currents and subsequent heat buildup. Thin laminations built with Arnon produce a more efficient unit and free up design constraints. Arnon laminations also lead the industry for switching frequencies above 1K Hz. Arnon can lower core loss by up to 50 percent when compared to other NGOES, the company said. Arnold has further advanced Arnon NGOES with its new MAP coating, an eco-friendly, water-based insulation that maintains low interlaminar losses at elevated frequencies. This sustainable coating system supports both high-performance and environmental design goals, helping manufacturers meet increasingly stringent energy efficiency standards.
(https://www.powertransmission.com)
More Information:
Marginal Bearing is a professional corporation for the holistic solution of technologies on self- lubricating and pre-lubricated plain bearings. Marginal bearing locates at Jiashan, Zhejiang, where is the base of manufacturing self- lubricating and pre-lubricated plain bearings in China.
Top Rated products Recommendation:
MG-EPB5Z Plastic Plain Bearings：
MG-EPB5Z Plastic Plain Bearings It is a high load material with excellent low friction factor. Marginal load application is acceptable and it is with good wear resistance both for hard and soft shafts. Continuous working temperature: -100℃～250℃; High load capacity; Higher speed is permissible; Marginal pressure is permissible; Best performance for oscillating movement.
https://www.marginalbearings.com/plastic-plain-bearings/mg-epb5z-plastic-plain-bearings.html
